Table of Contents
Advertisement
b. Press and hold the Volume Set button to hear the volume set tone.
c. Adjust the Volume Control Knob if necessary.
d. Release the Volume Set button.
e. Press and hold the PTT button to transmit.
The LED lights up solid red.
f. Release the PTT button to receive (listen).
•
Monitoring a Channel with Monitor button.
a. Press the preprogrammed Monitor button.
b. Adjust the Volume Control Knob if necessary.
c. Press and hold the PTT button to transmit.
The LED lights up solid red.
d. Release the PTT button to receive (listen).
The Carrier Squelch indicator appears on the display when you monitor a channel using the
preprogrammed Monitor button.
•
Monitoring a Channel using the selected zone channel.
a. Select the desired zone and channel.
b. Listen for a transmission.
c. Adjust the Volume Control Knob if necessary.
d. Press and hold the PTT button to transmit.
The LED lights up solid red.
e. Release the PTT button to receive (listen).
5.7.2
Monitoring Conventional Mode
When and where to use:
Your radio may be preprogrammed to receive Private-Line
Procedure:
1 Momentarily press the Monitor button to listen for activity.
The Carrier Squelch indicator appears on the display.
2 Press and hold the Monitor button to set continuous monitor operation.
The duration of the button press is programmable.
3 Press the Monitor button again, or the PTT button, to return to the original squelch setting.
If you try to transmit on a receive-only channel, you hear an invalid tone until you release the
PTT button.
Chapter 5: General Radio Operation
®
(PL) calls.
MN004476A01-AE
49
Advertisement
Table of Contents
