Table of Contents
Advertisement
MN004476A01-AE
Chapter 6: Advanced Features
Your radio can also be configured to allow you to accept or reject an upgrade.
6.20.1
Responding to the Notification of Upgrade
Procedure:
1 The display shows Upgrade? and two short, medium- pitched tones sound every 30 seconds
until the user makes a choice of either accepting, delaying, or rejecting the request.
2 Perform one of the following actions:
•
Press the Menu Select button below Acpt to accept the request to upgrade immediately.
•
Press the Menu Select button below Dlay to delay the request to upgrade.
•
Press the Menu Select button below Rej to reject the request to upgrade.
One of the following scenarios occurs:
•
If you choose to accept, the display shows Programming Dont power off to indicate the
upgrade is about to begin. The radio resets to install the upgrade. In the case of configuration data
upgrade, the process only takes a few seconds. In the case of firmware upgrade, the installation
takes several minutes.
NOTICE: The radio cannot be used while the upgrade is being installed. Therefore, make
sure to only accept the upgrade at a convenient time when immediate radio use is not
required.
•
If you choose to delay, a configuration data upgrade is installed automatically at the next power up.
However, in the case of a firmware upgrade, the radio prompts Upgrade? again at the next power
up.
•
If you choose to reject, the display shows Upg Aborted. The radio continues to function with the
current configuration until it gets reprogrammed.
NOTICE: If your radio has problems upgrading over-the-air, consult a qualified technician for
details.
6.21
Voice Announcement
This feature enables the radio to audibly indicate the current feature mode, zone, or channel assigned
to the user.
The available voice announcement priority options are:
High
Voice announcement is enabled even when the radio is receiving calls.
Low
Voice announcement is disabled when the radio is receiving calls.
6.22
Site Selectable Alerts (ASTRO 25 Trunking)
A Site Selectable Alert (SSA) is an Intelligent Lighting indicator with audio alert sent to radios at sites to
notify the users when there is a special situation that they need to be aware of.
Your radio supports up to 250 site aliases. Only authorized radios are enabled to send SSA.
110
Advertisement
Table of Contents
