Disassemble The Lcd Module; Remove The Lcd Bezel; Remove The Hinge Module - Lenovo Legion 7 Series Hardware Maintenance Manual

"Remove the system board, the LED board cable (vent lighting) and the power board cable" on page 38
"Remove the strip cover" on page 42
"Remove the LCD module" on page 42
Go to
https://support.lenovo.com/partslookup
part:
Upper case (with keyboard and touchpad)

Disassemble the LCD module

The LCD module as a whole is not an FRU. Instead, it contains FRUs as its components. Before
disassembling the LCD module, make sure it has been detached from the upper case.
Note: The adhesive tape is not reusable. Replace it when replacing related FRUs.

Remove the LCD bezel

Make sure the following FRU (CRU) have been removed.
"Remove the LCD module" on page 42
Step 1. Remove the LCD bezel.
Note: The LCD bezel is fragile and should be replaced if damaged.
Figure 29. Remove the LCD bezel
Go to https://support.lenovo.com/partslookup
part:
LCD bezel

Remove the hinge module

Make sure the following FRUs (CRUs) have been removed.
"Remove the LCD module" on page 42
"Remove the LCD bezel" on page 44
Step 1. Remove six screws and then remove the hinge module.
44
Hardware Maintenance Manual
to look up the Lenovo part number of the following replacement
to look up the Lenovo part number of the following replacement