Table of Contents
Advertisement
7.5
Setting options per channel
Notice
The DALI participants are connected directly to the DALI output. During
commissioning, the gateway checks the system and automatically addresses the
newly found DALI participants without DALI address. Each channel represents a
DALI participant.
Notice
Each DALI participant can also be positioned in the floor plan via the Web-based
user interface of the System Access Point. This makes a spatial allocation
possible and the parameter settings can be made via the floor plan.
General settings and special parameter settings must be made for each channel (DALI
participants).
The settings are made via the device function of the Web-based user interface
of the System Access Point.
Select device (DALI participants)
Notice
The DALI participants must first be positioned in the floor plan.
Fig. 14:
Select device
1. Select the device icon [1] in the floor plan of the working area view.
–
All setting options for the respective channel (DALI participant) are displayed in the list
view [2].
The following settings are available.
Product manual 9AKK107680A3585
Commissioning
│27
Advertisement
Table of Contents
