Shed Assembly – Roof - Craftsman 65018 Assembly Instructions Manual

SHED ASSEMBLY – ROOF
25
O
2
FF
GG
FF
1
Place skylight gasket (GG) into skylight (FF). Place sky-
light (FF) onto right roof panel (O). Secure from under-
side with eight screws (BB). Make sure rib on roof panel
is seated fully against gasket on skylight.
Before proceeding, locate and identify the six front
header tabs and six rear header tabs.
BB
x8
20
Before proceeding, locate and identify channels on
interior side of right roof (O) and left roof (Q). Locate
three underside tabs contained within each channel.
26
Lay right roof (O) directly over three tabs on right side
of front header (K) and three tabs on right side of rear
header (L). With right roof slots seated over/on header
tabs, check alignment in all six spots.
U O