HPE Primera 6 Series Product End-Of-Life Disassembly Instructions

Product End-of-Life Disassembly Instructions
Product Category: Storage
Marketing Name / Model
[List multiple models if applicable.]
HPE Primera 6xx Storage Controllers (600, 630, 650, 670)
Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions
for the disassembly of HPE products to remove components and materials requiring selective treatment, as defined by EU
directive 2012/96/EC, Waste Electrical and Electronic Equipment (WEEE).
1.0 Items Requiring Selective Treatment
1.1 Items listed below are classified as requiring selective treatment.
1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as
applicable.
Item Description
Printed Circuit Boards (PCB) or Printed Circuit
Assemblies (PCA)
Batteries
Mercury-containing components
Liquid Crystal Displays (LCD) with a surface
greater than 100 sq cm
Cathode Ray Tubes (CRT)
Capacitors / condensers (Containing PCB/PCT)
Electrolytic Capacitors / Condensers measuring
greater than 2.5 cm in diameter or height
External electrical cables and cords
Gas Discharge Lamps
MF877-00
Template Revision A
Notes
With a surface greater than 10 sq cm
Nodes =1 ea
Power supply =1 ea
IOM = 1 ea
Midplanes =1 ea
Temp sensor boards = 1ea
All types including standard alkaline and lithium
coin or button style batteries : 1EA Coin cell in
Node module; Up to 4 Li ion battery pack in Power
Cooling Battery Module
For example, mercury in lamps, display backlights,
scanner lamps, switches, batteries
Includes background illuminated displays with gas
discharge lamps
PCV insulation on external power cords.
HPE instructions for this template are available at MF877-01
Quantity
of items
included
in product
1 per node
1 per
power
supply
1 per IOM
1 per
Enclosure
1 per temp
sensor
2 Li Ion per
2Node
4 Li Ion per
4Node
1 Coin per
node
0
0
0
0
0
0
0
Page 1