13.
Connect the power connection cable (power cable or USB bus power cable)
to the power supply source (AC outlet or computer), and turn on the
ScanSnap.
14.
Reset the pick roller count.
1. Click the ScanSnap Manager icon
on the keyboard, and then select [Check consumable status] from the
Menu" (page
→ The [ScanSnap Manager - Check consumable status] window appears.
2. Click the [Reset] button for [PICK ROLLER Count].
→ A confirmation window appears.
3. Click the [Yes] button.
→ [PICK ROLLER Count] is reset to 0.
84).
in the Dock while holding down the [control] key
439
Replacing Consumables for S1300i
"ScanSnap Manager