Checking The Mac Address Of The Scansnap (Ix1500) - Fujitsu ScanSnap iX1500 Basic Operation Manual

Checking the MAC address of the ScanSnap (iX1500)

Check the MAC address of the ScanSnap on the touch panel.
1.
Click the ScanSnap Manager icon
[control] key on the keyboard, and select [Quit] from the
Menu" (page
a ScanSnap Manager exits.
2.
Press on the
screen.
3.
Press
4.
Check that [Wi-Fi connect mode] is set to [Access point connection] or
[Direct connection].
If [Wi-Fi connect mode] is set to [Wi-Fi off], press [Wi-Fi connect mode] and set it to [Access
point connection] or [Direct connection]
5.
Press [Wi-Fi information] to display the [ScanSnap information] screen.
6.
Check the [MAC address] in the [Network] tab.
84).
touch panel
to display the [Wi-Fi settings] screen.
Registering a Certificate/ Checking the Wireless LAN Settings (iX1500)
in the Dock while holding down the
of the ScanSnap to display the [Settings]
148
"ScanSnap Manager