Set Or Un-Set The Uefi Manufacturing Mode (Deprecated) - Lenovo ThinkSystem HR350A User Manual And Hardware Maintenance Manual

2.3 Set or un-set the UEFI manufacturing mode (Deprecated)

The command is used to set the UEFI to run on manufacturing mode on next boot.
Linux command:
$ ipmitool raw 0x3c 0x2 0x4 0xff
Description:
NetFn
Command
Request data:
Mask
Value
[7:0]
Response data:
Byte
1
0x3c
0x2
0x4 – Use bit 2 to control the feature, the effect depends on the value.
0x0 - Trigger to disable the feature that running at manufacturing mode 0xff - Trigger to enable the
feature that running at manufacturing mode
Data field
Completion Code
146