Engine Oil - B&Q FPLMP138 Original Instructions Manual

138 FPLMP138

Engine oil

WARNING! This product is not supplied with oil. However, for manufacturing
reasons, it is possible that a small quantity may be in the engine! Before
al
operating this product, it is essential to fill it with oil (4-stroke engine oil, e.g.
SAE
Engine oil has a significant influence on engine performance and service life.
Non-detergent or 2-cycle engine oils will damage the engine and should not
be
be used.
1. Unscrew and remove the oil tank cap (17).
2. Gradually add good-quality engine oil
en
3. Check the oil level frequently while filling. Wipe off oil dipstick and insert it into the
).
tank opening without tightening the cap, and then remove the dipstick again.
4. The oil level must be between the oil level markings (approx.
if necessary. Do not overfill (Fig. 11).
if
of
ed
ct.
5. After filling oil, wait
6. Wipe the spilt oil with a soft cloth and reattach the oil tank cap (17).
re
e.
3663602423287-GB-V04.indd 23
10W-30)!
11
17
1 minute and then recheck the oil level.
(SAE 10W-30). Allow the oil to settle.
Before you start
400 ml). Add more oil
max
min
27/9/2018 14:54
23