Advertisement
1.
Button Functions
Mute Button
Press this button to mute the
alert
2. Setting up the Device
A. Connect one end of the LH2 breathing tube to the assembled nasal cannula (as shown in the figure above).
B. Connect the other end of the LH2 breathing tube to the air outlet of the device firmly (as shown in the figure
above).
C. Connect the power cord to the DC inlet of the main device.
D. Plug the other end of power cord to the power outlet.
H-80
Series
Quick Operation Manual V1.0
H-80 Series Quick Operation Manual
Knob
Start
adjust device settings
1
Nasal Cannula
LH2 Breathing Tube
Power Outlet
Power Cord
treatment
and
2
Air Outlet
DC Inlet
3
4
Main Device
Filter Cap
(Air Inlet)
1 / 2
Back Button
Return to the previous operation.
Advertisement
Table of Contents
Related Manuals for BMC H-80 Series
Summary of Contents for BMC H-80 Series
- Page 1 H-80 Series Quick Operation Manual V1.0 H-80 Series Quick Operation Manual Button Functions Mute Button Knob Back Button Press this button to mute the Start treatment Return to the previous operation. alert adjust device settings 2. Setting up the Device...
- Page 2 H-80 Series Quick Operation Manual V1.0 Adjusting Device Settings Connect the power cord and LH2 breathing tube properly,the screen displays the Main Interface shown in the figure left. Turn the Knob to switch among interfaces and options. Press the Knob to conduct parameters setting confirm options.
Need help?
Do you have a question about the H-80 Series and is the answer not in the manual?
Questions and answers