TESTS (Printer Setup)
Figure 141
The TESTS (Printer Setup) Screen
Continue
FF at End:
FF at Start:
The TESTS (Printer Setup) screen determines how tests are run.
This field is used to restart a paused test.
This field can only be controlled programmatically. It is used to specify if you
want a form feed at the end of printing. The underlined entry is the active choice.
This field can only be controlled programmatically. It is used to specify if you
want a form feed at the start of printing. The underlined entry is the active choice.
Chapter 22, Tests Screen
TESTS (Printer Setup)
tstprint.wmf
541