Advertisement
Installation Instruction / EDID Setting /Firmware Update
4K HDMI 2.0 Splitter 1x2 Scaler mini (EZ-SP12H2)
A. Installation Instruction:
1. Connect HDMI source to HDMI splitter INPUT, connect two displays to splitter OUTPUT.
2.
Please TURN OFF Scaler if play 4K HDR Dolby Vision. ENSURE TV supports 4K HDR Dolby
Vision.
Connect 4K TV to Splitter OUT 1.
3. Using the Micro USB cable as power supply. (Power adapter is NOT included in box)
4. Please make sure all HDMI 2.0 cables are qualified.
5. Please check EDID setting, HDMI connection way as followings.
Please set EDID to 4K
audio & visual format is depending on your highest device which is connecting to HDMI
OUT1.
5. If your HDMI source, display devices support both HDR Dolby Vision & Dolby Atmos, then
HDMI Splitter can support both accordingly.
6. Firmware upgradeable splitter supports PC control, Android mobile phone control via
micro-usb port.
7．Old version HDMI splitter (2019) need upgrade firmware to ensure TV, Receiver play Dolby
Atmos and Dolby Vision in sync. New version HDMI splitter (2020) can get this application
without firmware updating. Please upgrade firmware at
https://www.easycoolav.com/4k60-hdmi-splitter-1x2-dolby-vision-hdr-scaler-output-from-4k-to-1080p-edid-
setting-mini-size-p0027-p0027.html
For more steps, please refer to below section
Firmware updating by PC control:
8.
Editable EDID (HDMI audio & video channel) management via PC control. The splitter EDID No.
29 provides 4K 60Hz HDR and 7.1ch sound, so TV can play 4K HDR video & soundbar play 7.1ch
audio simultaneously.
not audio system channel.
position. Default COPY 1 mode, EDID copy OUT 1 prior, the highest
The other brands splitter only support copy TV video and audio signal, but
Advertisement
Table of Contents
Related Manuals for EZCOO EZ-SP12H2
Summary of Contents for EZCOO EZ-SP12H2
- Page 1 Installation Instruction / EDID Setting /Firmware Update 4K HDMI 2.0 Splitter 1x2 Scaler mini (EZ-SP12H2) A. Installation Instruction: 1. Connect HDMI source to HDMI splitter INPUT, connect two displays to splitter OUTPUT. Please TURN OFF Scaler if play 4K HDR Dolby Vision. ENSURE TV supports 4K HDR Dolby Vision.
- Page 2 9. About HDR, please connect HDMI source to TV directly without splitter, test if TV can support HDMI source HDR. When TV cannot display HDMI source HDR info correctly, that means TV issue, not splitter issue. 10. Please ensure HDMI 2.0 cable be qualified. HDMI Input cable: HDMI2.0 standard cable, <5m AWG26;...
- Page 3 Bitstream format has three options for digital sound How to get HDR (HDR 10 & HDR Dolby Version) picture? 1.Please connect HDMI source to TV directly without splitter, test if TV can support HDMI source HDR/HDR10/HDR Dolby Version. When TV cannot display HDMI source HDR info correctly, that means TV issue, not splitter issue.
- Page 4 XBox ONE: Settings----Video output ----Display Advanced----Video modes B. Set EDID by PC control: 1. Running the “Port Helper” https://www.easycoolav.com/4k60-hdmi-splitter-1x2-dolby-vision-hdr-scaler-output-from-4k-to-1080p-edid- setting-mini-size-p0027-p0027.html All the program and tool is available here.
- Page 5 Step 1 Select “USB Debug” Step 2 Select the chipset mode “STM32 Custom” Step 3 Find the USB Port Step 4 Open the USB Port Step 5 Send command “EZH” to get all command list ( If you have one 4K60Hz 2CH TV and one 1080P 7CH AV receiver, want to get 4K 60Hz TV Video, 7.1CH AVR Audio, then, you need send “EZS IN 1 EDID 29”...
- Page 6 == EZS IN x EDID y : Set Input x EDID{x=[1], y=[0~29]== == 0: 1080P_2CH(PCM) 1: 1080P_6CH 2: 1080P_8CH == 3: 1080P_3D_2CH(PCM) 4: 1080P_3D_6CH 5: 1080P_3D_8CH == == 6: 4K30Hz_3D_2CH(PCM) 7: 4K30HZ_3D_6CH 8: 4K30HZ_3D_8CH== == 9: 4K60Hz(Y420)_3D_2CH(PCM) 10: 4K60Hz(Y420)_3D_6CH == == 11: 4K60Hz(Y420)_3D_8CH 12: 4K60HZ_3D_2CH == 13: 4K60HZ_3D_6CH...
- Page 7 Please check User Manual in box carefully when you need the fastest assistance, efficient service.
Need help?
Do you have a question about the EZ-SP12H2 and is the answer not in the manual?
Questions and answers