Bush WMNS714W Installation & User's Instructions page 14

Introduction of control panel
3- Delay timer
By using this auxiliary function, you can set the time
when your machine start washing. This time can
vary from an hour to 23 hours.
To use auxiliary function of delay timer:
- Press time delay button once.
- Expression of "1 h" will appear on the display. -
Symbol will flash on electronic display.
- Press on time delay button until the time, on which
you want washing operation to be started.
- To activate the time delay you have selected in the
programme, you may press on any auxiliary function
button you like except "Start/Standby" button.
If you have skipped the time delay you want to set,
you can go back to the time desired by keeping
pressed on time delay button.
If you want to cancel the time delay, you are
required to press the time delay button once.
symbol will no longer flash on electronic
display.
To run time delay function, your machine is required
to be operated by pressing on Start/Pause button.
Temperature Spin Speed Delay Timer Auxiliary
Selection
Delay Timer
Start/Pause
Function
4- Extra Rinse
You can make additional rinse operation
on your laundry by using this additional
function.
You may make the programme active by
pressing the extra rinsing auxiliary function button
when the led light of the
turns on.
Temperature
Spin Speed Delay Timer
Selection
Extra Rinse
Start/Pause button
By pressing on the Start/Pause button,
you may start the programme you have
selected or suspend a running
programme. If you switch your machine
to the standby mode, the Start/Standby
led on the electronic display will blink.
Temperature
Spin Speed Delay Timer
Selection
Start/
Standby
symbol
Start/Pause
Extra Rinse
Pre-wash
Start/