Related Manuals for motif Clean-Z CAD0001
Summary of Contents for motif Clean-Z CAD0001
- Page 1 User Manual Before using, please read the user manual carefully and follow the instructions to operate properly. Model No.: CAD0001...
- Page 2 Thank You! Thank you for purchasing our Clean-Z Ozone Cleaner, which is used to sanitize germs and bacteria by producing O . You can use it to sanitize your CPAP machine, the mask and tubing. The entire sanitization process requires no water or other chemical cleaning. Warning: * Keep this product out of the reach of children, and do not let them play with it.
-
Page 3: Product Description
Product Description Ozone port Power button USB port 1. Product parts Tubing Adapter Power Adapter Ozone Cleaner USB Cable Sanitizing Bag... - Page 4 2. Operation Instruction 1) Start-up stage: when the Clean-Z powered on, there is 1 minute for preparation with single beep, and LED slow flashing red with no ozone produced. 2) Cleaning stage: after start-up stage, the Clean-Z will start to produce ozone, and work continuously for 30 minutes with red LED cycling from LED to .
- Page 5 Application 1. Sanitizing the CPAP (1) Connect the Clean-Z to the CPAP with the tubing, power the Clean-Z to start sanitization. Note: you may need the tubing connector. Connector 1---Heated tube, Resmed S10, etc Connector 2---Resmed Airmini, Philips Dreamstation GO, etc Connector 2 Connector 1 (22mm O.D.
- Page 6 (2) To clean CPAP mask and tubing. Put mask and tubing in the sanitizing bag, and connecting the Clean-Z by the ozone port.Power the Clean-Z to start sanitization process. Mask Inside Filter cartridge: this filter converts ozone back into regular air. Replace filter every 6 months. Insert Filter Warning: After sanitization process, wait at...
-
Page 7: Specifications
Specifications Size 4.1x2.4x1.6 in. Weight 4.4 ounces Air flow 3.5 CFM Power consumption Power supply DC 4.5V~6.5V Store temperature -4 to 131 F Operation temperature 23 to 113 F Routine Care 1. When not in use, please store your Clean-Z. 2. -
Page 8: Troubleshooting
Troubleshooting Problem Possible Solutions Connect the Clean-Z to the adapter. Plug the adapter The Clean-Z does to the power source. Turn not work after on the Clean-Z. turning on Make sure the power con- No flashing light nection is correct. If the pr- or beeping sound oblem is still not resolved, please send it in for repairs. - Page 9 Clean your CPAP www.motifmedical.com (844) 272.8390...
Need help?
Do you have a question about the Clean-Z CAD0001 and is the answer not in the manual?
Questions and answers