Supervisor Level; Opening The Supervisor Level; Access Via Code; Change Code - Miele PDR 507 HP Operating And Installation Instructions

Supervisor level

Opening the Supervisor level

The settings menu in the 
level is locked against unauthorised
access. The menu can be unlocked
with a code.

Access via code

A code is needed to access the
Supervisor level.
Factory setting: the code is 000.

Change code

You can change the Supervisor level
access code to protect the tumble
dryer from unauthorised access.
Carefully enter a new code.
You will need to inform Miele if you
have forgotten your new code. Miele
will have to reset the code.
Make a note of your new code and
store it in a safe place.
82
Opening the Supervisor level
 Touch the  sensor.
Supervisor
The  symbol appears in the display
if you turn the programme selector to
a programme.

Supervisor
 Select
Enter code
 Enter the individual numbers and
confirm each selection with
The Supervisor level settings are
opened.
Supervisor
 Select the desired setting.

Exiting the Supervisor level

 Touch the  sensor or switch off the
tumble dryer.
Access via code
Change code
level
Access via code


0

Language

Brightness
level
.
OK
OK .

