Advertisement
CEN-IO Series
Wi-Fi® Network I/O Extenders
The Crestron® CEN-IO-COM-202, CEN-IO-DIGIN-204, CEN-IO-IR-204,
and
CEN-IO-RY-204
are wireless I/O extenders designed to expand the
available control ports within a commercial or residential system. The
extenders communicate to the local network over Wi-Fi® wireless
communications for remote control and monitoring.
NOTE: The CEN-IO-COM-202, CEN-IO-DIGIN-204, CEN-IO-IR-204,
and CEN-IO-RY-204 are functionally similar. For simplicity within this
guide, the term "extender" is used to refer to all models except where
otherwise noted.
In the Box
1
CEN-IO-COM-202, CEN-IO-DIGIN-204, CEN-IO-IR-204, or
CEN-IO-RY-204, Wi-Fi Network Extender
Additional Items
1
Bracket, Mounting, Integrated DIN Rail Clip (4510935)
1
Connector, 2-Pin (2003574)
1
Power Pack, PW-0512WUL (2045867)
2
Screw, 6-32, 3/8 in., Phillips (2007225)
CEN-IO-COM-202 Only
2
Connector, 5-Pin (2003577)
CEN-IO-DIGIN-204 Only
1
Connector, 5-Pin (2003577)
CEN-IO-IR-204 and CEN-IO-RY-204 Only
1
Connector, 8-Pin (2003850)
Mount the Device
The extender can be mounted onto a flat surface or a standard DIN rail
using the included mounting bracket.
CAUTION: To prevent overheating, do not operate the extender in an
area that exceeds the environmental temperature range (41 to 104 °F
or 5 to 40 °C) for this device.
Optional rack mount and pole mount kits (not included) are also available
for use with the extender. For more information, refer to the RMK-IFE-1U
Installation Guide (Doc. 7627) and the PLMK-IFE-101 Installation Guide
(Doc. 7615) at www.crestron.com/manuals.
Determine a Mounting Location
Mount the extender in a location that will provide optimum performance.
For more information, refer to the Best Practices for Installation and
Setup of Crestron RF Products Reference Guide (Doc. 6689) at
www.crestron.com/manuals.
Quick Start
1
Advertisement
Table of Contents
Related Manuals for Crestron CEN-IO Series
Summary of Contents for Crestron CEN-IO Series
- Page 1 Mount the extender in a location that will provide optimum performance. CEN-IO-RY-204, Wi-Fi Network Extender For more information, refer to the Best Practices for Installation and Setup of Crestron RF Products Reference Guide (Doc. 6689) at Additional Items www.crestron.com/manuals. Bracket, Mounting, Integrated DIN Rail Clip (4510935)
-
Page 2: Surface Mounting
Quick Start CEN-IO Series Wi-Fi® Network I/O Extenders Surface Mounting DIN Rail Mounting 1. Attach the mounting bracket to the surface using four appropriate 1. Pull the DIN rail release tab downward using a flat-head screwdriver. mounting screws (not included) through the four mounting holes on 2. -
Page 3: Connect The Device
Quick Start CEN-IO Series Wi-Fi® Network I/O Extenders CEN-IO-DIGIN-204 Rear Panel Connections Connect the Device Make all device connections as shown in the following illustrations. CEN-IO-COM-202 Rear Panel Connections CEN-IO-IR-204 Rear Panel Connections... -
Page 4: Connect To A Wi-Fi Network
The following LED indicators appear on the extender front panel: LED Indicator Color Meaning ONLINE Green The extender is connected to a Crestron control system via Wi-Fi communications. PWR (dual Amber Power is being supplied but the extender is not NOTE: The device SSID is the extender’s model name plus the last color) yet ready for operation. - Page 5 5. Click Add network manually. Fields for entering the wireless access point (WAP) credentials are displayed. 8. Use the Device Discovery tool in Crestron Toolbox software to scan for the extender. The device hostname will match the device SSID as described in step 1.
-
Page 6: Configure The Device
Visit the Product Pages The extender can be configured and provisioned to a control system using Scan the QR code to visit the product pages. Crestron Toolbox software once it has been activated as described in CEN-IO-COM-202: Connect to a Wi-Fi Network. - Page 7 Development Tools License Agreement. Crestron product operating system software is licensed to Crestron dealers, CSPs, and end-users under a separate End-User License Agreement. Both of these Agreements can be found on the Crestron website at www.crestron.com/legal/software_license_agreement. The product warranty can be found at www.crestron.com/warranty.
Need help?
Do you have a question about the CEN-IO Series and is the answer not in the manual?
Questions and answers