Crestron HD-EXT-USB-2000-C Do Manual

DO
HD-EXT-USB-2000-C
4K HDMI and USB over HDBaseT
®
DO Install the Devices
The Crestron ® HD-EXT-USB-2000-C consists of the HD-TX-USB-2000-C transmitter and the
HD-RX-USB-2000-C receiver. The transmitter and receiver can be mounted on a flat surface or onto
a rack rail.
Mounting onto a Flat Surface
Using four mounting screws (not included), mount the transmitter and receiver onto a flat surface
such as a wall.
Mounting onto a Wall
Mounting onto a Rack Rail
The transmitter and receiver can be mounted onto the front or rear rail of a rack. Position either the
left or the right mounting flange of the device so that the holes align with the holes in the rack. Then,
secure the device to the rack using two mounting screws (not included).
Mounting onto a Rack Rail
GUIDE
Extender 2000
®
DO Check the Box
QTY PRODUCT
2 Connector, 2-Pin
1 Connector, 3-Pin
1 Connector, 5-Pin
HD-RX-USB-2000-C Only
1 Power Pack, 24 Vdc, 1.25 A, 100-240 Vac
DO Connect the Devices
Make connections to the transmitter and receiver as required for the application.
Connecting the Transmitter
Make connections to the front and rear panels of the transmitter.
Front Panel Connections
HDMI IN:
From HDMI
®
audio/video unbalanced
analog audio
source
Rear Panel Connections
:
10BASE-T/100BASE-TX
Ethernet to LAN
COM: COM:
To
To
RS-232 RS-232
device device
PART NUM.
2049091
2049092
2049093
2045870
AUDIO IN: AUDIO IN:
From From balanced/ (Host): (Device):
To USB To USB
unbalanced
analog audio device host
source source
HDBT OUT:
To HDBT IN port
of receiver
IR IN: IR OUT:
IR IN:
To IR
From IR From IR
receiver emitter
receiver
IR OUT:
To IR
emitter