Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for VESTEL VAD 470 AG AVRP KNT
Summary of Contents for VESTEL VAD 470 AG AVRP KNT
- Page 1 COOKER HOOD USER MANUAL...
- Page 2 r product.
-
Page 4: Introduction Of Device
INTRODUCTION OF DEVICE MODELS VAD 470 AG AVRP KNT ADW-9015 External Chimney Internal Chimney Cooker Lighting Aluminum Cassette Filter Control Panel Tempered Glass... -
Page 5: Warnings And Safety Precautions
WARNINGS AND SAFETY PRECAUTIONS *Before you take pot, fry-pan etc. from the *This product is designed for usage at hob, put their lids on. home. *Do not leave hot oil on the hob. Pots that *Your products usage voltage is 220-240 have hot oil in them may cause selfignition. - Page 6 *Keep package materials away from *In case of flame, cut power of the cooker children as they may be dangerous for hood and the cooking appliances, cover the them. flame. Never use water in order to *Be sure that your child does not play with extinguish it.
-
Page 7: Unpacking The Device
Standard Accessories Plastic Outlet (Figure 1) Plastic outlet mounted to air outlet of the cooker hood Figure 1 Place of the Product: After installation of your product, distance between range hood and electrical hob should be at least 65 cm and gas hobs at least 75cm. Figure 2 Min.65 cm Electrich hobs 65 cm Min.75 cm... - Page 8 ISLAND HOOD ASSEMBLY Please follow below instructions. Hanging Installation of ceiling connection plate : hole Front sticker (figure 3) on ceiling connection F R O ceiling plate and control panel of chimney hood should connection plate have the same direction. 1)Drill 10mm holes from A,B,C,D points.
- Page 9 Placing Motor Cabin to Hanging Bar Place fixed hanging sticks on hanging bar through the channels. Fix parts together via 3,5x9,5 screws Figure 6 Assembling bracket hole on the Ceiling Connection Sheet Figure 6 Installing Aluminum Flexible Pipe Connect aluminum flexible pipe to outlets on the product and kitchen wall.
- Page 10 Hanger Hook Fixing Motor Cabin on Product Body Place hanging hooks on product body onto channels on motor cabin. Fix them together with 3,5x9,5 screws Figure 10 Hanger hook hole on the motor block Figure 10 Making Connections Connect 220V power supply socket with corresponding motor socket.
- Page 11 Replacing the Lamps Cut off the connection of the cooker hood with electricity. Take off the aluminum cassette filter. Take off the failed lamp and replace it with a new one that is of the same rating. (Please wait for the lamps to cool as they might hurt your hand.) Replacing 50W Halogen Lamp In order to change halogen lamps, take the...
- Page 12 Usage of 5 Speed Digital Control Usage Remove protective folio on the inox product after installation. Speed Selection The product has 5 speeds of ventilation level. One of 1,2,3,4,5 speeds is selected in accordance with steam of cooking or fry. Motor is started pressing control button on the front panel.
-
Page 13: Control Panel Use
CONTROL PANEL USE After installation, remove the protective plastic film from the metal panels. Speed adjustment Product has 5-speed motor. Low-mid-high levels can be selected according to the cooking fume intensity. Push pull knob controlling the motor is located on the front panel. As the knob is rotatedclockwise, the desired fan speed can be selected. -
Page 14: Maintenance
MAINTENANCE *Disconnect electricity connection before maintenance and cleaning process. *Aluminum cassette filter holds the dust and the oil in the air. *Metal filter should be washed once in a month with hot and soaped water or, if possible, at dishwasher (60C). *Take off aluminum cassette filter pressing on springy latches on end point. - Page 15 Cooker-hood does not work Illumination Lamp does not work Cooker-hoods air suction is weak Cooker-hood does not direct air out (at places without chimney) If the product does not work: Before you contact the technical service: Make sure that the product is plugged in and the electric fuse of the electric wiring is running. Do not take any action that will damage the product.
Need help?
Do you have a question about the VAD 470 AG AVRP KNT and is the answer not in the manual?
Questions and answers