Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for VESTEL 3261
Summary of Contents for VESTEL 3261
- Page 1 COOKER HOOD USER MANUAL...
- Page 2 r product.
-
Page 4: Introduction Of Device
INTRODUCTION OF DEVICE MODELS ADB-6016 ADB-6008 ADB-9016 ADB-9008 ADX-6009 ADW-6008 ADX-9009 ADW-9008 415,440 Internal Chimney External Chimney Control Panel Cooker Lighting Aluminum Cassette Filter Tempered Glass... -
Page 5: Warnings And Safety Precautions
WARNINGS AND SAFETY PRECAUTIONS *Before you take pot, fry-pan etc. from the *This product is designed for usage at hob, put their lids on. home. *Do not leave hot oil on the hob. Pots that *Your products usage voltage is 220-240 have hot oil in them may cause selfignition. - Page 6 *Keep package materials away from *In case of flame, cut power of the cooker children as they may be dangerous for hood and the cooking appliances, cover the them. flame. Never use water in order to *Be sure that your child does not play with extinguish it.
-
Page 7: Unpacking The Device
Standard Accessories Plastic Outlet (Figure 1) Plastic outlet mounted to air outlet of the cooker hood Figure 1 Place of the Product: After installation of your product, distance between range hood and electrical hob should be at least 45-65 cm and gas hobs at least 65-75cm. Figure 2 Electrich hobs 45-65 cm 75 cm 65 cm Gas hobs 65-75 cm... - Page 8 INSTALLATION MONTAGE OF THE HOOD TO THE WALL There are 2 hanger sheets (L type) for hanging the device to the hanging screw. These sheets are provided with the screw set to enable packing convenience. Before hanging the device, screw these sheets to the M5 nailing nuts with M5 X 35 bolts.
- Page 9 WARNING : During drilling the hanging holes , please pay attention to the diameter of the holes to be used for hanging the hood. If the diameters of hanging holes are not as pointed , the hood can not be assembled properly.
- Page 10 Placing Range Hood on The Wall Hang L shaped hanging bars on A and B points (Figure 8) Figure 8 Tighten the Hanging Screws: Tighten screws after hanging to fix your product via screwdriver. You may use the M5x35Ysb screws to have fine tune parallelism of hood.
- Page 11 Installing Aluminum Flexible Pipe: Connect aluminum flexible pipe to outlets on the product and kitchen wall. Please make sure that this connection is strong enough not to break when the hood is on in the highest level. Figure 11 Figure 11 External Installing the External Chimney: chimney...
-
Page 12: Replacing The Lamps
REPLACING THE LAMPS Cut off the connection of the cooker hood with electricity. Take off the aluminum cassette filter. Take off the failed lamp and replace it with a new one that is of the same rating. (Please wait for the lamps to cool as they might hurt your hand.) Replacing 20 W Lamps In order to replace halogen lamps, hold one lamp, as shown in... - Page 13 USAGE OF 5 SPEED DIGITAL CONTROLl Usage Remove protective folio on the inox product after installation. Speed Selection The product has 5 speeds of ventilation level. One of 1,2,3,4,5 speeds is selected in accordance with steam of cooking or fry. Motor is started pressing control button on the front panel.
-
Page 14: Technical Specifications
Functions of the Product Your hood is compatible for use with our without chimney. Usage with chimney The product should be connected to a chimney that will direct the air out during usage with chimney. In order to achieve best performance, pay attention that the duct system follows the shortest way for connection to the chimney. -
Page 15: Remote Control
REMOTE CONTROL Motor on/off Speed up Speed down Switch lamps on/off MAINTENANCE *Disconnect electricity connection before maintenance and cleaning process. *Aluminum cassette filter holds the dust and the oil in the air. *Metal filter should be washed once in a month with hot and soaped water or, if possible, at dishwasher (60C). - Page 16 Cooker-hood does not work Illumination Lamp does not work Cooker-hoods air suction is weak Cooker-hood does not direct air out (at places without chimney) If the product does not work: Before you contact the technical service: Make sure that the product is plugged in and the electric fuse of the electric wiring is running. Do not take any action that will damage the product.
Need help?
Do you have a question about the 3261 and is the answer not in the manual?
Questions and answers