Disassemble The Lcd Module - Lenovo IdeaPad 5 Hardware Maintenance Manual

"Remove the I/O board with cable" on page 35
"Remove the speaker" on page 36
"Remove the system board" on page 37
"Remove the LCD module" on page 39
Go to
https://support.lenovo.com/partslookup
replacement part:
Upper case (with keyboard and touch pad)

Disassemble the LCD module

The LCD module as a whole is not a FRU. Instead, it contains FRUs as its components. Before
disassembling the LCD module, make sure it has been detached from the upper case.
Remove the LCD CAP
Make sure the following unit have been removed.
"Remove the LCD module" on page 39
Step 1. Slide the LCD CAP to the left carefully and then remove the LCD CAP.
Figure 25. Remove the LCD CAP
Go to
https://support.lenovo.com/partslookup
replacement part:
LCD CAP
Remove the LCD bezel and the middle frame
Make sure the following FRUs (CRUs) have been removed.
"Remove the LCD CAP" on page 41
Step 1. Remove three screws and then remove the LCD bezel.
to look up the Lenovo part numbers of the following
to look up the Lenovo part numbers of the following
.
Chapter 4 Removing a FRU or CRU
41