Troubleshooting - rollease acmeda AUTOMATE MT01-2101-069002 Manual

17

TROUBLESHOOTING

Problem
Motor is not responding
Motor Beeps + Flashes x4 Times
Cannot program a single Motor
(multiple motors respond)
26 | Automate
Programming Instructions | Modular Curtain Motor
™
Cause
A / C power supply not plugged in.
Insufficient charging from solar
PV panel
Transmitter battery is discharged
Incorrect Wiring (AC Module
power)
Radio interference/shielding
Receiver distance is too far from
transmitter
Charging failure
Battery voltage is low
Multiple motors are paired to the
same channel.
Remedy
Check motor to power cable
connection and AC plug
Check connection and orientation
of PV panel
Replace battery
Check wiring of Field Plug if not
factory fitted
Ensure transmitter is positioned
away from metal objects and the
aerial on motor or receiver is kept
straight and away from metal
Move transmitter to a closer
position
Connect battery to charger and
check if LED indicates charging
Recharge with a compatible
charger
Always reserve an individual
channel for programming
functions
SYSTEM BEST PRACTICE - Provide
an extra 15 channel remote in your
multi motor projects, that provides
individual control for each motor
for programming purposes
Place all other motors into sleep
mode (ref to section 15)
ROLLEASE ACMEDA