Table of Contents
Advertisement
LI-ION CHARGER
Plug the Li-Ion Charger into a wall outlet.
IN THE VACUUM: MULTIFLEX™
To put the vacuum in storage mode, press the
MultiFLEX™ Wand Unlock Latch while folding the
handheld vacuum forward until the wand clicks and
locks. Plug the charger into the charging port on the
handheld vacuum.
sharkclean.my
CHARGING THE BATTERY
USING THE LI-ION CHARGER
Remove the handheld vacuum from the wand by
pressing the Wand Release Button and pulling
up. Plug the charger into the charging port on the
handheld vacuum.
To remove the battery, squeeze the Battery
Release Button and slide backwards. Plug the
charger into the charging port on the battery.
IN HANDHELD VACUUM
OUT OF THE VACUUM
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the duo clean IZ202SM and is the answer not in the manual?
Questions and answers
roller not turning can't figure out how to open to check for blocks
To check for blockages when the roller is not turning on the Shark Duo Clean IZ202SM:
1. Turn off the vacuum.
2. Remove the handheld vacuum from the wand.
3. Check all intake openings to the dust cup and remove any debris or blockage.
4. Check the wand, accessories, and inlet openings for blockages and remove any debris.
5. Inspect the brushroll area. If hair or fibers are wrapped around the brushroll, continue cleaning or carefully remove them.
6. To clean the Soft Roller:
- Pull it out using the tab.
- Tap off debris and wipe with a dry towel.
- Hand wash with water if needed and let air-dry for 24 hours before reinserting.
This answer is automatically generated