Insignia NS-LED4RGB18 Quick Setup Manual

QUICK SETUP GUIDE
LED Tape
Light
NS-LED4RGB18
PACKAGE CONTENTS
• LED tape light
• Double-sided tape
• Quick Setup Guide
FEATURES
• Premium LEDs produce 20 selectable colors
• Multi-step dimmer adjusts to the brightness level you
want
• Self-adhesive backing attaches to TVs, cabinets, or other
spaces for quick, custom lighting
• Reduces eye strain from TVs and monitors while
enhancing image contrast
• Lights powered through USB (on your TV or computer) or
with a USB power adapter (not included)
Before using your new product, please read these instructions to prevent any damage.
LED Cut Light
Wire
light strip line controls
Light controls
Change color
Turn on/off
Adjust brightness
USING YOUR TAPE LIGHT
USB
Shortening your tape light
connector
• Use a pair of scissors to cut on a cut line. Cut lines are
about 1.3 in. (3.3 cm) apart.
Warning: Do not cut the silver solder markings. Only cut in the
center of the copper-colored pads, as shown.
Cut line
Attaching your lights
1 Peel the adhesive backing off the lights, then adhere the
lights where you want them.
2 Optional: Attach the double-sided tape to the back of the
light control, then adhere it where you want it.
Connecting to power
• Place the tape light where you want it, then connect the
USB connector to your TV, computer, or other USB power
source.