Table of Contents
Advertisement
Quick Links
Remington Solar "Builder Series" Solar Attic Fans
Installation Guide
Message from our president...
Congratulations! You're in the club. You've seen the light. You own the best solar attic fan sold in the United
States. While we look forward to cooling your attic, thus saving you on utility bills, there are other advantages
to the Remington Solar attic fan as well. Do you have any idea how much wear and tear on your furnace
happens in a hot harsh environment? Do you know what your expensive insulation does in 150 degree heat
over the years? You made a great decision in your purchase, so please don't hesitate to contact us if you need
help in any way.
.
Model #
SF-BLD20-BLK
Roof mount
Tools Required
Reciprocating Saw Marking Pen Measuring Tape String
Razor Knife Drill (for screws) Caulking Gun (Silicone sealant)
½
6, 6# 1
Phillips Head Screwdriver
NOTE: Please go to http://remingtonsolar.com/how-to-install-your-remington-solar-attic-fan/ (or go to
RemingtonSolar.com and look for the link How To Install Your Remington Solar Attic Fan) to watch a brief
video of an actual installation.
Each model is a bit different
SF-BLD20-BLK
shingles. This unit includes humidistat and thermostat. Make sure you remove the small plastic bag
that has the small thermostat and humidistat (underneath the fan near the blade)
after installation. Also, clip the small plastic tie that will allow the thermostat to hang (approximately
2 feet) from the unit (to get an accurate attic temperature reading). Fan operates above 82 degrees
1 |
P a g e
Murray Smith
President – Remington Solar
214-257-8300
Model
– This is a simple encased panel fan that flashes underneath the leading edge of your
#SF-BLD30-BLK
Roof mount
Model
#SF-BLD40-BLK
Roof mount
Advertisement
Table of Contents
Related Manuals for Remington Solar Builder Series
Summary of Contents for Remington Solar Builder Series
- Page 1 States. While we look forward to cooling your attic, thus saving you on utility bills, there are other advantages to the Remington Solar attic fan as well. Do you have any idea how much wear and tear on your furnace happens in a hot harsh environment? Do you know what your expensive insulation does in 150 degree heat over the years? You made a great decision in your purchase, so please don’t hesitate to contact us if you need...
- Page 2 3. Center the Solar Attic Fan approximately 2-5 feet away from the roof ridge to facilitate good circulation. NOTE: using Remington Solar attic fans with ridge vents are fine. We recommend putting your fan 5 feet down from your ridge vent. Also, close any vent within 8-10 feet of your solar fan.
- Page 3 INSTALLATION Step1 Choose a location for your Remington Solar Attic Fan on the south of the roof, considering potential problems like tree, chimney etc. They may shade the solar panel during certain times of the day, reducing run time. If a southern or western exposure is not possible, the fan can be installed on any other exposure and the solar panel can be adjusted to capture maximum sunlight.
- Page 4 1. Notice your adapter has 3 cords. Plug the power cord into your wall socket (power) FIRST. 2. Underneath your Remington Solar attic fan, you will see a larger wire that is plugged into itself. Unplug that wire. You will then have 2 wires with plug ends.
- Page 5 Dealer will not honor any claims for damage to any products. Note: Hail damage is covered by your homeowners policy. You must register your Remington Solar product within 30 days to activate warranty: https://remingtonsolar.com/register-your-product/ Remington Solar, Inc – Corporate Mailing Address 5706 E.
- Page 6 Trouble Shooting Guide Fan won’t run 1. Check the temperature. Is it 80 degrees or hotter? Is it in the sun? Cup the blue thermostat in your hands and warm it up by breathing on it. (Don’t use a hair dryer!) 2.
Need help?
Do you have a question about the Builder Series and is the answer not in the manual?
Questions and answers