Advertisement
Quick Links
2002-2008 Honda VTX1800 models
I n s t a l l a t i o n I n s t r u c t i o n s
PLEASE READ ALL DIRECTIONS BEFORE STARTING INSTALLATION
I16-035EX
www.powercommander.com
2191 Mendenhall Drive North Las Vegas, NV 89081 (800) 992-4993 www.powercommander.com
PARTS LIST
1
Power Commander
1
USB Cable
1
CD-ROM
1
Installation Guide
2
Power Commander Decals
2
Dynojet Decals
2
Velcro
1
Alcohol swab
1
Posi-tap
THE IGNITION MUST BE TURNED
OFF BEFORE INSTALLATION!
YOU CAN ALSO DOWNLOAD THE
POWER COMMANDER SOFTWARE AND
LATEST MAPS FROM OUR WEB SITE AT:
www.powercommander.com
02-08 Honda VTX1800 PCV EX - 1
Advertisement
Related Manuals for Dynojet Power Commander V Ex
Summary of Contents for Dynojet Power Commander V Ex
- Page 1 CD-ROM Installation Guide Power Commander Decals 2002-2008 Honda VTX1800 models Dynojet Decals I n s t a l l a t i o n I n s t r u c t i o n s Velcro Alcohol swab Posi-tap...
- Page 2 Do NOT connect anything to this port unless wire into the hole of the PCV until is stops and then instructed to do so by Dynojet. It is used to tighten the screw. Make sure to reinstall the rubber transfer crank trigger data from one module to plug.
- Page 3 FIG.A Remove the seat. Remove the airbox assembly. Remove the fuel tank. Remove the left side cover. Using the supplied Velcro, secure the PCV EX module behind the left side cover at the location shown in Figure A. Clean both surfaces with the supplied alcohol swab prior to applying the Velcro.
- Page 4 Plug the PCV EX wiring harness in-line of the fuel injectors and the stock wiring harness (Fig. D). FIG.D The pair of PCV EX connectors with ORANGE colored wires go in-line of the FRONT cylinder’s fuel injector. The pair of PCV EX connectors with YELLOW colored wires go in-line of the REAR cylinder’s fuel injector.
Need help?
Do you have a question about the Power Commander V Ex and is the answer not in the manual?
Questions and answers