KETRON Audya Series User Manual page 133

Saving a microphone effect
After you have modified one of the MICRO PRESETS,
you can save it by overwriting the same Preset or
giving a new name. Here is the procedure to follow.
1. Select a MICRO PRESET.
2. Press the EDIT button on the front panel and edit
the parameters as explained above.
3. Once finished, press the SAVE button on the front
panel.
4. Type a name by using the keyboard (for example
MY_MICRO) and press the USER 5 button (SAVE),
as shown in Figure 349.
5. By using the F1-F10 buttons is now possible to
select the User Preset from the list, as shown in
Figure 350.
Setting a VOCALIZER effect
1. Press and hold for few seconds VOCALIZER
button.
2. The VOICETRON PRESETS window will appear
(Figure 351) that is the effects for the microphone
connected to MICRO 1 on the rear.
3. Press the F1-F10 buttons to select one of the
VOICETRON PRESETS.
4. Press the CURSOR Ó Á buttons to scroll the
VOICETRON PRESETS pages.
By using the F1-F10 buttons you can select 20
VOICETRON PRESETS, from two pages.
PAGE 1
F1–VOCALIZER
F2–AUTOTUNE VOCAL
F3–BLUEGRASS DUET
F4–COUNTRY DUET
F5–CHAINED DUET
F6–STANDARD TRIO
F7–STANDARD TRIO 2
F8–CHAINED TRIO
F9–STAND. QUARTET
F10–JAZZ QUARTET
5. In Figure 352 you can see the VOICETRON
PRESETS of the second page.
6. Please note that the last Preset corresponding
to the F10 button on the second page is "MIDI
MODE" (shown by the arrow on
that is the harmonization mode controlled by
the MIDI file. In this mode, the harmonization
is automatically controlled by the melody track
of the MIDI file. Please see "Setting the VOCAL
mode" on the GM Parts section in this manual.
PAGE 2
F1–USER 1
F2–USER 2
F3–USER 3
F4–USER 4
F5–USER 5
F6–USER 6
F7–USER 7
F8–USER 8
F9–USER 9
F10–MIDI MODE
Figure 352),
Voicetron
Figure 349
Figure 350
Figure 351
Figure 352
KETRON • AUDYA
133