Installing The Drive Trays For The E2600 Controller-Drive Tray Configurations; Things To Know - General Installation Of Drive Trays With The E2600 Controller-Drive Tray; For Additional Information On Drive Tray Installation; Procedure - Installing The De1600 Drive Trays - Bosch DSA E Series Installation Manual

44 en | Installing the Drive Trays for the E2600 Controller-Drive Tray Configurations
7 Installing the Drive Trays for the E2600 Controller-
Drive Tray Configurations
7.1 Things to Know – General Installation of Drive Trays with the
E2600 Controller-Drive Tray
NOTICE!
If you are installing the drive tray in a cabinet with other trays, make sure that the combined
power requirements of the drive tray and the other trays do not exceed the power capacity of
your cabinet. For more information, refer to the SANtricity ES Storage Manager manual.
–
–
–
WARNING!
Risk of bodily injury
An empty tray weighs approximately 56.7 kg (125 lb). Three persons are required to safely
move an empty tray. If the tray is populated with components, a mechanized lift is required to
safely move the tray.
7.2

For Additional Information on Drive Tray Installation

Refer to the Storage System Site Preparation Guide on the SANtricity ES Storage Manager
Installation DVD for important considerations about cabinet installation.
7.3 Procedure – Installing the DE1600 Drive Trays
WARNING!
Risk of bodily injury
Two persons are required to safely lift the component.
WARNING!
Risk of bodily injury
If the bottom half of the cabinet is empty, do not install components in the top half of the
cabinet. If the top half of the cabinet is too heavy for the bottom half, the cabinet might fall
and cause bodily injury. Always install a component in the lowest available position in the
cabinet.
You can install the drive tray into an industry standard cabinet.
- | V2 | 2012.09
Special site preparation is not required for any of these drive trays beyond what is
normally found in a computer lab environment.
The power supplies meet standard voltage requirements for both domestic and
worldwide operation.
Take these precautions:
– Install the drive trays in locations within the cabinet that let you evenly distribute the
drive trays around the controller-drive tray.
– Keep as much weight as possible in the bottom half of the cabinet.
Installation Manual
E2600 DSA E-Series iSCSI Disk Arrays
Bosch Security Systems