Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for SereneLife SLPAC10
Summary of Contents for SereneLife SLPAC10
- Page 1 SLPAC10 Portable Air Conditioner Fan and Dehumidifier...
-
Page 2: Table Of Contents
CONTENT Important Safety Tips Precautions...........................3 Product Introduction Main Parts and Components..................4 Control Panel and Remote Controller.................6 Product Operation Placement and Installation.....................7 Operation Method......................9 Clean and Maintenance Drainage Method......................10 Maintenance........................11 Common Failures and Diagnosis Intelligent Error Detection....................12 Fuse Parameters........................12 Troubleshooting.......................13 www.SereneLifeHome.com... -
Page 3: Important Safety Tips
Important Safety Tips Precautions Please read the Manual carefully before operating the machine: • This machine is for household use only. • This machine is for indoor use only. Please place it in dry environment. • Check power cord frequently. If power cord, plug or A/C is damaged, please don’t operate. -
Page 4: Product Introduction
Special Warning: • Place the A/C on even ground and install it vertically, so as to ensure normal operation of the compressor. • The A/C should be at least 50cm away from surrounding objects. Keep air inlet and outlet smooth. •... - Page 5 www.SereneLifeHome.com...
-
Page 6: Control Panel And Remote Controller
Control Panel and Remote Controller Cool High Cooling Model 1. Power key Press the key to turn ON/OFF the A/C. 2. Swing key Press this key at any time after turning on the A/C to swing the wind guide bar automatically. -
Page 7: Product Operation
Product Operation Placement and Installation Placement • Place it at even and dry place, and keep it at least 50cm away from its surrounding object. Installation • Screw the exhaust duct assembly in the air outlet behind the panel (counterclockwise). www.SereneLifeHome.com... - Page 8 • Insert the air exhaust hose into the window sealing plate, adjust opening width of window so that the window can match with the sealing plate properly; length of the sealing plate is adjustable. Incorrect Installation • It’s important to keep the exhaust duct smooth. Incorrect installation will a ect work of the A/C.
-
Page 9: Operation Method
OPERATION METHOD Cooling Mode • When the A/C enters cooling mode automatically or cooling mode is selected after power ON, the cooling indicator lamp lights up. • Press Up/Down key to adjust setting temperature (16°C~30°C)(60°F~86°F). • Press Speed key to choose High/Mid/Low speed. Fan Mode •... -
Page 10: Clean And Maintenance
Auto mode (for cooling model only) • When pressing mode key or choosing auto mode by pressing the remote controller, the auto indicator lamp lights up. • After choosing Auto mode, operation state is determined by environmental temperature: when environmental temperature is higher than 25°C (77°F), the operation state is the same as that of cooling mode;... -
Page 11: Maintenance
MAINTENANCE Notice: In order to avoid electric shock, please turn o the A/C and unplug before maintenance or repair. CLEANING • Unplug before cleaning. • Wipe with soft semi-dry cloth. Don’t use chemical reagent, such as benzene, alcohol and gasoline etc; otherwise surface of the A/C and even the whole A/C will be damaged. -
Page 12: Common Failures And Diagnosis
SEASONAL CLEANING If the A/C will not be used for a long time: • Pull out the water plug to drain. • Run the A/C in fan mode for 2H till the inside is dry. • Turn o the A/C and unplug. •... -
Page 13: Troubleshooting
Troubleshooting In case of any of the following trouble, please contact professional maintenance personnel in time. TROUBLE CAUSE SOLUTION The A/C doesn’t No display Reset circuit breaker on AC cord work The display panel displays Restart the A/C after power off and “FL”...
Need help?
Do you have a question about the SLPAC10 and is the answer not in the manual?
Questions and answers
Need to purchase electric pump