Download Print this page

Troubleshooting - Sealey BC25635SR Instructions

Booster cables 25mm2 x3.5m cca 600amp

Advertisement

5. TROuBLEShOOTING

Problem
flat Battery vehicle will not turn over
Booster cable gets hot
Parts support is available for this product. to obtain a parts listing and/or diagram,
please log on to www.sealey.co.uk, email sales@sealey.co.uk or telephone 01284 757500.
Environmental Protection
recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted,
taken to a recycling centre and disposed of in a manner which is compatible with the environment.
WEEE Regulations
dispose of this product at the end of its working life in compliance with the eu directive on Waste electrical and electronic
equipment (Weee). When the product is no longer required, it must be disposed of in an environmentally protective way.
contact your local solid waste authority for recycling information.
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
ImPORTANT: no liability is accepted for incorrect use of this product.
WARRANTy: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
© Jack sealey limited
causes
insufficient/bad booster cable clamp
connection
Booster cables connected incorrectly
incorrect booster cables being used
the vehicles management system may not
be working correctly and may be stopping
the vehicle from starting. excessive
cranking of the engineer may cause cables
to get hot.
sole uK distributor, sealey Group.
Kempson Way, suffolk Business Park,
Bury st. edmunds, suffolk.
iP32 7Ar
Original Language Version
solutions
1. reconnect the booster cables as in
instructions.
2. check the battery terminals are
corrosion free if not clean and reconnect.
check if the reverse polarity led is
illuminated (red) and an audible tone can
be heard. If so disconnect clamps and refit
as instructions.
check the the vehicles battery AmP rating.
change the cables to the correct AmP type
if incorrect
stop trying to jump start the vehicle and
consult automotive electrician.
01284 757500
01284 703534
Bc25635sr | issue 1 26/04/16
www.sealey.co.uk
Web
sales@sealey.co.uk

Advertisement

loading