Fujitsu BS2000 SE Series Basic Operating Manual page 87

5. Switch on the optional Application Units
Before an Application Unit is switched on, the status indicator lights up orange (POWER STAND-BY).
> As the administrator or AU administrator, switch on the Application Unit using the SE Manager (menu
Hardware -> Units Units ,
Alternatively, switch on the Application Unit by pressing the On/Off switch.
The power-on indicator lights up green. The Application Unit switches on, conducts a system test and starts
the operating system.
i The controls, indicators and further on/off options for the AU are described in the "Additive Components"
Operating Manual [ ].
Further Application Units are switched on in the same way.
tab, Switch on symbol), see the "Operation and Administration" manual [ ].
4
5
87