Fujitsu BS2000 SE Series Basic Operating Manual page 86

> Call the SE Manager, e.g. after logging in on the local console via the browser of the Linux desktop (in the
"Computer" menu in the task bar) or via an administration PC (default), see the "Operation and
Administration" manual [ ].
Redundant MUs are switched on in the same way.
You can also switch on the MU remotely via the iRMC of the MU, see the "Operation and Administration" manual [ ].
3. Switch on the Server Unit SU /390
> As the administrator, BS2000 administrator or a privileged operator, switch on the Server Unit using the SE
Hardware -> Units Units
Manager (menu
manual [ ]. 5
Alternatively you can switch the Server Unit on by pressing the POWER ON button on the server's control panel
(see "Control panel (on the SE /390)"
displays no further error codes.
Then you can call an SVP console window in the SE Manager and start the BS2000 system using PROGRAM
LOAD FRAME: DETAIL-1.
When a POWER ON IPL is configured, the BS2000 system is loaded automatically (using AUXILIARY FRAME:
LOAD PRESET1).
Alternatively the IPL can also be initiated in the SE Manager (see the menu
-> <unit> (SU</390>) -> BS2000 operation mode
]
i
The control panel and SVP frames of the Server Unit are described in the "Server Unit /390" Operating
Manual [ ]. 2
4. Switch on the optional Server Units x86 (SE700/SE500 only)
Before the Server Unit is switched on, the status indicator lights up orange.
> Switch on the Server Unit by pressing the On/Off switch.
The power-on indicator lights up green. The Server Unit switches on, conducts a system test and starts
X2000.
If automatic IPL is configured for BS2000, the BS2000 system (Native or as a VM2000 monitor system) is
also started with the configured settings.
If automatic startup is configured for XenVMs, these systems are also started.
i The controls and indicators of the Server Unit are described in the "Server Unit x86" Operating Manual [ ].
Further Server Units x86 are switched on in the same way.
5
Switch on
, tab,
). The system is ready when the status indicator on the server's control panel
, "Operation and Administration" manual [ ]).
symbol), see the "Operation and Administration"
Systems -> <se server> (SE<model>) [
5
3
5
86