Advertisement
1. Sunshade
2. Flange-head bolt (5/16 x
1-1/4 inches)
3.
Torque the flange-head bolts to 1017 to 1355
N∙cm (90 to 120 in-lb).
7
Connecting the Wire
Harness
No Parts Required
Connecting the Wire Harness to
the Chassis Harness
Groundsmaster 4000 Series or Groundsmaster
5900 Machines
Groundsmaster 4000 Series Machines
Figure 10
3. Washer (5/16 inch)
4. Clip nut (side-frame
channel)
Figure 11
Groundsmaster 5900 Machines
g245179
1.
For Groundsmaster 5900 machines, raise the
hood; refer to the Operator's Manual for your
machine.
2.
If installed, remove the cap from the 2-socket
connector of the machine wire harness
13).
Groundsmaster 5900 Machines
1. 2-socket connector
(machine wire harness)
2. Cap
g246394
3.
Connect the 2-pin connector of the wire harness
of the kit to the 2-socket connector of the
machine wire harness
6
Figure 12
Figure 13
3. 2-pin connector (kit wire
harness)
(Figure 13
or
Figure
g246397
(Figure
g246396
14).
Advertisement
