Advertisement
2.
Assemble the fuse-block mount to the fuse block
(Figure
5) with the 2 socket-head screws (#10 x
3/4 inch) and 2 flange locknuts (#10).
3.
Torque the socket-head screws and
flange-locknuts to 419 to 513 N∙cm (37 to 47
in-lb).
Assembling the Wire Harness to
the Switch Panel
1.
Align the wire harness to the switch panel
(Figure
6).
2.
Align the mounting rails of the fuse block up and
insert the fuse block into the rectangular opening
in the switch panel as shown in
Figure 6
Figure
7.
1. Rectangular opening
(switch panel)
2. Fuse block (mounting rails
up)
g250868
3. Flange locknut (#10)
3.
Align the square holes in the fuse-block mount
with the square holes in the switch panel
7).
4.
Assemble the fuse-block mount to the switch
panel
(Figure
1/2 inch) and 4 flange locknut (#10).
5.
Torque the flange-locknuts to 419 to 513 N∙cm
(37 to 47 in-lb).
4
Figure 7
4. Fuse-block mount
5. Switch panel
6. Carriage bolt (#10 x 1/2
inch)
7) with the 4 carriage bolts (#10 x
g245152
(Figure
Advertisement
