goodnature M-1 Owner's Manual page 16

Section 6:
PRE-OPERATION CHECKS
Ensure the ReadyGrind™ Kit and the Press Kit are properly assembled according to Section 4: Setup
Drop
Check that the press rod is fully retracted into the machine (this can be done by powering the machine on and pressing
Drop
the STOP button).
Check that the Moving Platen is pushed snugly to the back of the Press Chamber.
Drop
Recipe is prepared, 1-2.5 lb of produce, depending on your recipe.
Drop
If the grinder does not start and the Hopper Door safety indicator light
at the bottom left of the button panel is blinking then open the Hopper
Door and then close it. The Hopper Door safety indicator light should
turn on and be solidly illuminated. Press the GRIND button to start a
GOODNATURE M-1 OWNER'S MANUAL
SETUP & OPERATING INSTRUCTIONS
Operation
TROUBLESHOOTING TIP:
grind cycle.
16
28