Dynamic Range Setup; Test Tone; Screen Setup - Blaupunkt Chicago IVDM-7002 Owner's Manual

Menu Settings

Dynamic Range Setup

Press SETUP button on the remote and press the SRC button
repeatedly to move to Audio setup mode
- Press [ or ] button to activate dynamic range setup and press
[ENTER] button.
- Press [ or ] button to select + or – dynamic range.
Note: The level varies upon the sequence following: OFF, 1/8, 2/8,
3/8, 4/8, 5/8, 6/8, 7/8, Full.
37

Test Tone

Press SETUP button on the remote and press the SRC button
repeatedly to move to Audio setup mode
- Press [ or ] button to activate Test Tone setup and press
[ENTER] button.
- This will create a test tone for any selected speaker.
Use [ or ], [ or ] to navigate speaker configuration
Note: Be sure to have the center, rear and subwoofer set to large or
small when testing. This can be checked in the SPEAKER SETUP
menu. (See page 35)

Screen Setup

Press SETUP button on the remote and press the SRC button
repeatedly to move to Screen setup mode