Table of Contents
Advertisement
Troubleshooting
Problem
The appliance does not turn on
Weak suction
Brush roller tangled
indicator blinking
CWT empty indicator
blinking
DWT full indicator
blinking
All lights off in oper-
ation
Battery indicator
blinking
Self-cleaning icon
blinking
MAX icon blinking
Note:
If the above troubleshooting guide fails to provide a solution, please contact us at
support@tineco.com or visit our website www.tineco.com for further support.
Possible cause
Out of power
Auto protection for overheating Restart after cooling down
Debris channel is blocked
The HEPA is dirty or not intalled Clean and dry the HEPA
1. The brush roller is blocked
2. The brush roller is not
installed
CWT is empty
The dirty water in DWT has
reached the MAX line
Battery overheat or malfunction
Low battery
Brush roller is dirty
Motor malfunction
16
Solution
Charge the appliance
Clean the debris channel and
DWT
1. Remove blockages
2. Install brush roller correctly
Refill CWT
Empty the dirty water and then
reinstall the DWT
Cool the appliance down and
restart
Charge the appliance, or restart
Start self-cleaning
Contact Customer Service
- Quick Links:
- Overview
- Assembly
- Operation
- Maintenance
- Troubleshooting
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the iFloor 3 Series and is the answer not in the manual?
Questions and answers
the usually on blue light is blinking red. Why?
The Tineco iFloor 3 Series does not mention a "blue light blinking red" specifically. However, various indicators blinking suggest different issues. Possible reasons for a blinking light include:
- Battery indicator blinking: Low battery; charge the appliance or restart.
- CWT (Clean Water Tank) empty indicator blinking: Refill the CWT.
- DWT (Dirty Water Tank) full indicator blinking: Empty and reinstall the DWT.
- Brush roller indicator blinking: The brush roller is blocked or not installed correctly; remove blockages or install properly.
- MAX icon blinking: Motor malfunction; contact customer service.
If none of these match the issue, further troubleshooting may be needed.
This answer is automatically generated
I bought the cleaner (bottle and cleaning t a bs) how much do I put in my vac mop
Add one bottle cap of cleaning solution to each full tank of clean water.
This answer is automatically generated