General Safety Instructions - Bosch Rexroth VT-VPCD Series Operating Instructions Manual

Hyquip Limited New Brunswick Street Horwich Bolton Lancashire BL6 7JB UK
Company Registered in England No: 4167649 VAT Registration No: 732 5692 25 BS EN ISO 9001:2008 No: LRQ 0964389
+44 (0)1204 699 959
enquiries@hyquip.co.uk
to them, recognize potential hazards and institute appropriate safety measures. Qualified
personnel must observe relevant specialist rules and have the required expertise.
With regard to hydraulic products, specialist knowledge means, for example:
Ability to read and completely understand hydraulic circuit diagrams,
complete understanding in particular of interrelationships with regard to safety
equipment and
knowledge of the function and structure of hydraulic components.
Bosch Rexroth offers qualifying training courses in specific fields. You can find an
overview of training contents on the Internet at:
http://www.boschrexroth.de/didactic

2.5 General safety instructions

Observe valid regulations for accident prevention and environmental protection.
Observe the safety regulations and rules of the country where the product is used/
operated.
Use Rexroth products only in technically perfect condition.
Observe all notes given on the product.
Persons who install, commission, operate, demount or maintain Rexroth products
must not consume any alcohol, drugs or pharmaceuticals that may affect their
ability to respond.
Only use accessory and spare parts approved by the manufacturer in order to rule
out personnel hazards arising from unsuitable spare parts.
Adhere to the technical data and ambient conditions provided in the product
documentation.
If unsuitable products are installed or used in safety-relevant applications,
unintended operational states can occur in these applications, which can cause
personal injury and damage to property. Therefore, use the product only in
safety-relevant applications such as in explosion protection areas or in safety-
related parts of a control (functional safety), if this use is expressly specified and
permitted in the documentation.
You may commission the product only when it has been established that the final
product (for example, a machine or system), in which the Rexroth products are
installed, complies with national regulations, safety regulations and standards
relevant for the application.
www.hyquip.co.uk/web/index
Safety instructions
RE 30028-B/09.13, VT-VPCD, Bosch Rexroth AG
9/60