Table of Contents
Advertisement
8/44
Bosch Rexroth AG
Safety instructions
Bosch Rexroth AG does not assume any liability for damages caused by not
intended use. The user assumes all risks involved with not intended use.
Not intended use of the product includes:
•
Using the digital controller assembly outside the specified performance
limits and operating conditions and in particular the specified environmental
conditions;
•
Using the digital controller assembly as safety-related part of controls in the
sense of DIN EN ISO 13849. Functional safety must be implemented using
appropriate additional components.
2.4
Qualification of personnel
The activities described in this documentation require basic knowledge of the
electric installation, control technology, programming and hydraulics, especially
secondary controlled drives, as well as knowledge of the appropriate technical
terms. In order to ensure safe use, these activities may only be carried out by
qualified technical personnel or an instructed person under the direction and
supervision of a qualified person.
Qualified personnel are those who can recognize potential hazards and apply the
appropriate safety measures due to their professional training, knowledge and
experience, as well as their understanding of the relevant conditions pertaining
to the work to be undertaken. Qualified personnel must observe the rules/laws
relevant to the specific subject area.
Qualified personnel are those who can recognize potential hazards and apply
the appropriate safety measures due to their professional training, knowledge
and experience, as well as their understanding of the relevant conditions on
secondary controlled drives pertaining to the work to be undertaken. Qualified
personnel must observe the rules/laws relevant to the specific subject area
applying to secondary controlled drives.
The operation of the SYHNC100-SEK...3X digital controller assembly requires the
safe handling with the PC program WIN-PED® version 6.6.
2.5
General safety instructions
•
Observe the applied provisions for the prevention of accidents and for
environmental protection.
•
Observe the safety regulations and provisions of the country where the product
is implemented/used.
•
Exclusively use Rexroth products in good technical order and condition.
•
Observe all notes on the product.
•
Persons who assemble, operate, disassemble or maintain Rexroth products
must not consume any alcohol, drugs or pharmaceuticals that may affect their
ability to respond.
•
Only use accessories and spare parts authorized by the manufacturer.
•
Comply with the technical data and ambient conditions indicated in the product
documentation.
•
The installation or use of inappropriate products in safety-relevant applications
could result in uncontrolled operating conditions when being used which in turn
could cause injuries and/or damages to property. Therefore please only use
a product for safety-relevant applications if this use is expressly specified and
permitted in the documentation of the product.
•
Do not commission the product until you can be sure that the end product
(for example a machine or system) where the Rexroth product is installed
complies with the country-specific provisions, safety regulations and application
standards.
SYHNC100-SEK...3X | RE 30162-B/04.11
Hide quick links:
Advertisement
Table of Contents
