Page 1
PT620 MULTIFUNCTION VKR POWER TOWER VKR1808 This product is intended for indoor, home use only and is not to be used in a commercial setting. OWNER’S MANUAL...
Page 2
The diagram below highlights and reviews many of the important Safety and Warning labels also found on the unit. Please ensure any user of the unit familiarizes themselves with these Safety and Warning guidelines before use. Page 1 PT620 / VKR1808...
Please contact us by any of the following methods : Maximum Weight Limit is 250 lbs for user weight. Hupa International, Inc. 21717 Ferrero Parkway Walnut, CA 91789 Telephone: 1 (888) 266 - 6789 Fax: 1 (909) 598 - 6707 Email: info@hupa.net Page 2 PT620 / VKR1808...
Use to measure the length or size of hardware including QTY: 1 bolts to ensure you are using the correct part. Adjustable or flat wrenches Use to securely install parts including nuts and bolts. QTY: 2 Page 3 PT620 / VKR1808...
Hand-tightening for now will help ensure easy assembly. Wrench-tightening should be performed after all parts are assembled to ensure all nuts, bolts, and parts are tightly secured before use. #15. Lock Nut (M8) [4 pieces] Page 5 PT620 / VKR1808...
Page 7
(#15). Repeat this process on the other side. Now secure the Lock Nuts (#18) that were hand tightened in the lower portion. Repeat this process on the other side. #15. Lock Nut (M8) #18. Lock Nut (M10) [14 pieces] [8 pieces] Page 6 PT620 / VKR1808...
Page 8
#28. Screw (M8x35 mm) [2 pieces] the Upper Frame End Cap (#31) over the Pull Up Handlebar (#10) and both the L Shaped Upper Frames (#06). #15. Lock Nut (M8) #20. Curved Washer (M8) [8 pieces] [4 pieces] Page 7 PT620 / VKR1808...
Page 9
Insert the VKR Handlebar (#08) down through both holes. Please jiggle the VKR Handlebar (#08) a little to ensure it is fully inserted. Repeat on the opposite side. #15. Lock Nut (M8) [4 pieces] Lift as shown Correct Assembly Page 8 PT620 / VKR1808...
Page 10
However, for your own safety, please make sure to read this entire Owner’s Manual which includes safety instructions and warnings, as well as any safety/warning labels affixed to the product before use. For your safety , please visually and functionally inspect and test the unit after assembly is complete. Page 9 PT620 / VKR1808...
Exploded View The following diagram is provided to help you familiarize yourself with the parts and hardware that will be used during the assembly process. Page 11 PT620 / VKR1808...
1 (888) 266-6789 or 1 (909) 598-9876, or mail in a written request to: Hupa International, Inc. 21717 Ferrero Parkway Walnut, CA 91789 More detailed information about how to reach our CUSTOMER SUPPORT may be found on the General Information page of this manual. Page 12 PT620 / VKR1808...
Page 14
Keep your left leg straight. 2. Return to the starting position slowly. 2. Gently pull your right leg toward your trunk without raising your upper body. Switch leg positions and repeat. Page 13 PT620 / VKR1808...
Page 15
Repeat on the other leg. muscles in your left calf stretch. other. Switch leg positions and repeat. Reverse arm positions and Page 14 PT620 / VKR1808...
Page 16
THANK YOU FOR YOUR PURCHASE MODEL NO.: PT620 / VKR1808 Please fill in the information below and keep this manual along with your sales receipt as proof of purchase. Serial Number : Date of Purchase : Retailer : Hupa International, Inc.
Need help?
Do you have a question about the PT620 and is the answer not in the manual?
Questions and answers
**** I able to buy missing parts from anywhere
Where to order replacement parts for pt620