Argos 900/0104 Installation And Safety Instructions

These instructions are for your safety. Please read through them thoroughly
before use and retain for future reference.

Siting Instructions

This product is battery powered and is therefore exempt from IEE wiring regulations concerning
bathrooms.
This product has special protection against the ingress of moisture and is IP44 rated.
This product is suitable for all areas of a bathroom. The chosen location should allow for the
product to be securely mounted. (e.g. to a stud wall framework)
This product can be mounted either vertically (portrait) or horizontally (landscape)

Fitting/replacing the batteries

This product requires 3x 1.5V AA batteries
The performance of the product will depend on the quality and type of batteries used. Always use
good quality batteries.
The battery tube is attached to the rear of the mirror with Spring Clips for ease of fitting the batteries.
It can also be completely removed from the product - by disconnecting the jack plug and socket.
Loosen 2 screws on battery tube switch end. remove lid, insert batteries, observing correct polarity
(+ end of batteries towards switch end). Refit lid, secure screws and switch-on to test.
Installation and Safety Instructions
LED bathroom mirror
To mount portrait, use these slots
Switch +
Battery tube attached
with Spring Clips
To mount
Landscape
Use these
Slots
Jack plug
connection
900/0104