Led Lighting - CLEVERSPA Monte carlo Instruction Manual

HOW TO INSTALL YOUR CLEVERSPA
FIT LED LIGHTS LOOSELY TO ALLOW THE CLEVERSPA
Correct installation of your LED lights is extremely
important. Failure to follow instructions carefully may
result in their early failure. Correct installation will ensure
they stay working every time you use your CleverSpa
Ensure lights are not installed too tightly, they must be
fitted loosely, with freedom to move between the retention
LIGHT KIT PARTS
A
Mains Power
Converter
B
RF Wireless
Receiver
C
LED
Light Strip
D
RF Remote Control
& CR2025 3V Battery
How to connect
the LED lighting kit
A
Mains Power
Converter
.
®
First
Lighting
Loop
Ensure lighting is not tight between
loops and LEDS face the base
IMPORTANT! Note the placement of alignment notches
08

LED LIGHTING

®
TO EXPAND WHEN FILLED.
®
loops on the base of the hot tub to allow the lighting strip
to expand when filled with water.
Allow some excess strip across each gap, this will reduce
stress on the lighting.
Failure to do this can reduce the lifespan of your lighting.
Please see image below.
Start/End lighting
equally spaced
Base of CleverSpa
®
B
RF Wireless
Receiver
Last
Lighting
Loop
C
LED
Light Strip