Firmware Upgrade - Fanvil X1S User Manual

Server Address
Configuration File Name
Protocol Type
Update Interval
Update Mode
TR069
Enable TR069
ACS Server Type
ACS Server URL
ACS User
ACS Password
Enable TR069 Warning
Tone
TLS Version
INFORM Sending Period
STUN Server Address
STUN Enable

Firmware Upgrade

10.6.5
Web page: Login phone web page, go to [System] >> [Upgrade].

Provisioning server address. Support both IP address and domain
address.
The configuration file name. If it is empty, phone will request the common
file and device file which is named as its MAC address.
The file name could be a common name, $mac.cfg, $input.cfg. The file
format supports CFG/TXT/XML.
Transferring protocol type ，supports FTP、TFTP、HTTP and HTTPS
Configuration file update interval time. As default it is 1, means phone will
check the update every 1 hour.
Provision Mode.
1. Disabled.
2. Update after reboot.
3. Update after interval.
Enable TR069 after selection
There are 2 options Serve type, common and CTC.
ACS server address
ACS server username (up to is 59 character)
ACS server password (up to is 59 character)
If TR069 is enabled, there will be a prompt tone when connecting.
TLS version (TLS 1.0, TLS 1.1, TLS 1.2)
INFORM signal interval time. It ranges from 1s to 999s
Configure STUN server address
To enable STUN server for TR069
Picture 121 - Web page firmware upgrade
77