Intelligent Battery Station - dji MATRICE 300 RTK User Manual

Replacing the Propellers
It is recommended to replace the propellers only in an emergency situation during operations. After the
emergency flight is over, please contact DJI technical support or an authorized agent for overhaul as
soon as possible.
Propeller blades are sharp; please handle with care.

Intelligent Battery Station

The Battery Station features a total of 12 battery ports and can charge up to eight TB60 Intelligent Flight
Batteries, and four WB37 Intelligent Batteries. It also comes built in with integrated wheels that make
the Battery Station easy to maneuver from one place to another.
Warnings
1. Keep any liquids (oil, water etc.) away from the inside of the Battery Station.
2. DO NOT close the Battery Station during charging or discharging, and ensure it is well ventilated and
able to dissipate heat.
3. The Battery Station is only compatible with the TB60 Intelligent Flight Battery, and WB37 Intelligent
Battery. DO NOT use the Battery Station with any other battery models.
4. Place the Battery Station on a flat and stable surface when in use. Ensure the device is properly
insulated to prevent fire hazards.
5. DO NOT touch the metal terminals on the Battery Station. If there is any noticeable debris buildup,
wipe the metal terminals with a clean, dry cloth.
6. Take care to avoid injuring fingers when opening or closing the Battery Station, or using the
retractable trolley handle.
7. Place the batteries in the specified directions.
8. Air pressure in the Battery Station may change during air transportation or after extreme barometric
pressure changes. The pressure valve knob on the side of the Battery Station will balance the air
pressure automatically.
9. Please use the dust blower to clear the sand and dust in the Battery Station.
MATRICE 300 RTK User Manual
©
2020 DJI All Rights Reserved.
27