Setting Up The System For The First Time - Initial Setup Wizard - Sony PCS-1 Operating Instructions Manual

Setting Up the
System for the First
Time — Initial Setup
Wizard
When you turn on the Communication
Terminal for the first time after installation
and the self-diagnosis is completed, the
setup wizard appears on the monitor screen.
Register your local system data with the
setup wizard using the Remote Commander.
Notes
• You can change the settings made with the
setup wizard later using the Setup menus.
• The setup wizard will also be displayed when
you install the PCS-B768 ISDN Unit to your
system later. Perform the setup again.
1
Select the language used for the on-
screen menus and messages in the
Language Setup Wizard.
Language: Select one of seven
languages; English, French, German,
Japanese, Spanish, Italian, Chinese.
Language Setup Wizard
Language
2
Use the V, v, B or b button on the
Remote Commander to select "Next",
then press the PUSH ENTER button.
The ISDN Setup Wizard appears when
the PCS-B768 ISDN Unit is connected.
When the ISDN Unit is not connected,
the LAN Setup Wizard is displayed.
Proceed to step 9.
28
Setting Up the System for the First Time — Initial Setup Wizard
English
Next Cancel
3
Set the following items on the ISDN
line.
ISDN Setup Wizard
Country/Region
Country/Region Code
Protocol
Previous
Country/Region: Select your country
or region.
Country/Region Code: Enter your
country code or region code with the
number buttons on the Remote
Commander.
Protocol: Select the protocol of the
ISDN line you are using.
4
Use the V, v, B or b button to select
"Next", then press the PUSH ENTER
button.
5
Enter the telephone number of the
ISDN used by the system.
When you use one ISDN line, enter the
same number both in the A1 and A2 text
boxes (except for the USA and Canada).
Area Code
A1
A2
B1
B2
C1
C2
Previous
Area Code: Enter the area code. Do not
enter the first "0" number.
Local Number: Enter the telephone
number.
USA
1
National ISDN
Next Cancel
Local Number
Next Cancel