Connection Example With A Whiteboard - Sony PCS-1 Operating Instructions Manual

Connection Example With a Whiteboard

Notes
• Be sure to turn off all the equipment before making any connections.
• Do not connect/disconnect the cable with the power on. Doing so may damage the
Camera Unit, Communication Terminal or mimio Xi.
AUDIO OUT VIDEO IN AUDIO IN
AUX1– –AUX2
(MIXED)
VIDEO OUT
AUX MAIN– MONITOR– SUB RGB OUT
(supplied with the mimio Xi)
Notes on using the mimio Xi
• Do not use any cable other than the dedicated cable supplied with the
recorder.
• Attach the capture bar vertically at the left upper corner of the whiteboard.
• The available area captured by the capture bar is limited to within 1300 × 900
mm based on the top left corner of the whiteboard. Anything written on the
whiteboard outside the area cannot be captured.
• Use only the stylus, marker and eraser that come with the mimio Xi for
writing on a whiteboard.
• Do not connect a device other than the mimio Xi to the WHITE BOARD
connector on the Communication Terminal.
126
Connection Example With a Whiteboard
TERMINAL VISCA OUT
CAMERA UNIT MIC
ISDN UNIT
(PLUG IN POWER) WHITE
1 2 BOARD
100BASE-TX DC 19.5V
10BASE-T
DSB
IR OUT
1 2
to WHITE BOARD
Dedicated cable
Whiteboard
mimio Xi capture bar