Remote Control - Warn VR EVO Install Manual

• Always remove jewelry and wear eye protection when making battery connections.
• Never route electrical cables across sharp edges.
• Never route electrical cables near parts that get hot.
• Never route electrical cables over battery terminals.
• Never route electrical cables through or near moving parts.
• Always insulate and protect all exposed wiring and electrical terminals.
• Always place the supplied terminal boots on wires and terminals.
F1
Power
(72" long red)
Cable
W
IRING
W A R N I N G
Ground (Black)
F2
Negative (72" long black) Cable
• Never engage or disengage clutch if winch is under load, winch rope is in tension or drum is moving.
• Never leave winch remote control where it can be activated during free spooling, rigging, or when the winch is not being used.
• Never leave the wireless winch remote control turned on when installing, freespooling, rigging or servicing winch, or when the winch
is not being used.
Wired Activation Light:
Red light on when wired mode is
activated.
Winch Power-Out Button:
Press to control the power-out operation
of the winch.
Wire
A
1.
103484A3 103484A3
R C
EMOTE ONTROL
W A R N I N G
Wireless Activation Button:
Press and hold to activate wireless mode.
Wireless Activation Light:
Blue light on when wireless mode is
Winch Power-in Button:
Press to control the power-in operation
of the winch.
Wired Function
=
activated.