Connectors - Toshiba ST-7000-C Series Owner's Manual

Pos terminal
Table of Contents

Advertisement

3. CONNECTORS

3. CONNECTORS
#
COM5
#
(Option)#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
COM2
#
COM1
#
#
#
Connector
AC Inlet
AC Outlet
P24V DC Outlet
PS/2 (Keyboard)
USB0, 1, 2, 3 (Powered
USB) (Option)
LAN
DRW1, DRW2
VGA
COM1, 2
COM3, 4, 5, 6
(COM5, 6: Option)
LPT1
Line-out (Option)
Mic-in (Option)
*: COM6 is installed on the PCI slot.
Powered USB (24V)
(Option)
Powered USB (12V)
(Option)
LPT1
COM3
COM4
A connector for the AC inlet
A connector to supply AC power to the CRT.
AC power is output in synchronization with the ON/OFF status of the POS terminal.
A terminal of a DC24V line to which the power cable of the Receipt/Journal printer is
connected.
Mini-DIN 6-pin female type connector.
Connector for the PS/2 type keyboard.
Connector for the USB (Universal Serial Bus) interface USB V2.0/1.1 and UHCI
(conforming to Universal Hub Controller Interface V2.0/1.1)
NOTE: USB functions may not be supported depending on the Operating System.
USB0 to USB3 are powered USB sockets, which are 3 ports of 12V USB (USB0 to
USB2) and 1 port of 24V USB (USB3). The lower part of these sockets can be used
as general 5V USB connectors.
Modular type connector for the 10BASE-T/100BASE-TX LAN interface
A 24V type drawer is connectable.
A 15-pin VGA connector to the CRT
D-sub 9-pin male type connector (without power supply)
A slot scanner, modem, serial Interface type scale, EFT, etc. are connectable.
D-sub 9-pin female type connector (with +5V, +12V output)
A line display unit or RS-232C type hand scanner is connectable.
NOTES:
1 COM6 cannot be used when the touch panel TFT is connected to the POS terminal.
2. COM6 is available only when the optional kit is installed.
D-sub 25-pin female connector
Printer, etc. having a Centronics interface or equivalent are connectable.
Used for connecting an external speaker via the stereo mini jack terminal
Used for connecting a monophonic microphone via the mono mini jack terminal
LINE OUT
(Option)
COM6
MIC (Option)
(Option)
VGA
DRW1
PS/2 K/B
LAN
DRW2
Description
3- 1
24V Power
for Printer
EO1-12030
3. CONNECTORS

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents