Hitachi SRW-0J Instruction Manual page 37

Overload restriction
129
level 2
Overload restriction
130
limit constant 2
Software lock mode
131
selection
RUN time/Power
132 ON
time level
Operation direction
133
restrict
start reduced
134
voltage
135 Display selection
(NOTE 1) SJ300 series only .
(NOTE 2) L300P series : 0.5* rated current-1.50* rated current(A)
No. Function name
Torque limit mode
136
selection
Torque limit level 1
setting
137 (Forward-regenerati
ng at 4
quadrant mode
Torque limit level 2
(Reverse-regenerati
138
ng at 4
quadrant mode)
Torque limit level 3
(Reverse-driving at
139
4
quadrant mode)
Torque limit level 4
setting
140 (Forward-regenerati
ng at 4
quadrant mode
Torque LAD-STOP
141
selection
Reverse run preven-
142
tion selection
Selection
non-stop
143
function at instanta-
neous power failure
Chapter 10 LCD display and operating for SJ300/L300P series
>b025 OLOAD
2LEVEL 0000.0A
>b026 OLOAD
2CONST 01.00
>b031 S-LOCK
Mode MD1
>b034 TIME
WARN 00000
>b035 LIMIT
F/R FREE
>b036 RVS
ADJUST 06
>b037 DISP
Mode ALL
Display
>b040 TRQ_LIMIT
Mode 4-SET
>b041 TRQ_LIMIT
LEVEL1 150%
>b042 TRQ_LIMIT
LEVEL2 150%
>b043 TRQ_LIMIT
LEVEL3 150%
>b044 TRQ_LIMIT
LEVEL4 150%
>b045 TRQ_LIMIT
SELECT OFF
>b046 LIMIT
PREV OFF
of
>b050 IPS-DECEL
Mode OFF
0.5* rated current-2.00* rated current(A)
0.10 - 30.00(s)
MD0(impossible to change the data except
this item when SFT terminal is ON) /
MD1(impossible to change the data except
setting frequency item when SFT terminal is
ON) /
MD2(impossible to change the data except
this item) /
MD3(impossible to change the data except
setting frequency item) / MD10(possible to
change data on operating)
0 – 65535 ( × 10hr)
FREE(forward and reverse are valid) /
FWD(only forward) / REV(only reverse)
00(start reduce voltage time small)
-06(start reduced voltage time large)
ALL(all display) / FUNCTION(each function
display) / USER(user setting / main setting)
(7/15)
Data range
4-SET(4 quadrant mode)
operation) / O2 (Analog input) / OP1(Option 1)
/ OP2(option 2)
0 - 200(%),no( invalid)
0 - 200(%),no( invalid)
0 - 200(%),no( invalid)
0 - 200(%),no( invalid)
OFF(invalid) / ON(valid)
OFF(invalid) / ON(valid)
OFF(invalid) / ON(valid)
(NOTE 2)
/ TM(terminal
(NOTE 1)
(NOTE 1)
(NOTE 1)
(NOTE 1)
(NOTE 1)
(NOTE 1)
(NOTE 1)
(NOTE 1)