Hitachi SRW-0J Instruction Manual page 22

（3）Trip Monitor
How to display each of trip data is following explanation.
・Example
In case of display last time (ERR2) trip contents.
Trip Monitor
ERR1 OC. Accel
F 0037.00Hz ACC
Press the
ERR2 Over.V
F 0035.30Hz DEC
Press the
ERR2 Over.V
F 0035.30Hz DEC
Press the
ERR2 Over.V
Iout 0022.5A DEC
Press the
ERR2 Over.V
V pn 0395.0V DEC
Press the
counted from when inverter is operating.
ERR2 Over.V
RUN 000010hr DEC
Press the
which time is counted from when inverter is turned on.
ERR2 Over.V
O N 000012hr DEC
Chapter 10 LCD display and operating for SJ300/L300P series
key to select "ERR2".
2
In the display example, Factor is Over.V(Over voltage trip), frequency is
35.30Hz on tripping. Inverter status is DEC(During deceleration).
key, then move the cursor to the bottom row.
1
key to display output current on tripping.
2
In the display example, output current is 22.5A on
tripping.
key to display PN voltage on tripping.
2
In the display example, PN voltage is 395V on tripping.
2
key to display accumulated time on tripping during run which time
In the display example, accumulated time on tripping
during run is 10 hours while inverter is turned on.
key to display accumulated time on tripping of ON time
2
In the display example, accumulated time on tripping of ON
time is 12 hours which time is counted from when inverter
is turned on.